+86-028-85255257
产品简介
光纤跳线用来做从设备到光纤布线链路的跳接线。有较厚的掩护层,一般用在光端机和终端盒之间的连接。
产品特点:
切合Telcordia GR-326-CORE标准
低插入损耗,高回波衰减,高稳定性
重复插拔特性好,交换性好
接纳标准金属零部件
陶瓷插芯,PC,UPC和APC研磨
可提供普通PVC,LSZH,OFNP,OFNR,TPU等差别颜色,差别外皮质料
可提供G657A,G652D等差别纤芯光纤质料
产品应用:
光纤跳线产品广泛运用到:通信机房、光纤到户、局域网络、光纤传感器、光纤通信系统、光纤连接传输设备、国防战备等。适用于有线电视网、电信网、盘算机光纤网络及光测试设备。细分下来主要应用于几个方面。
项目 | 测试条件 | 单模 | 多模 | ||
光学特性 | 插入损耗 | UPC | SM:1310nm/1550nm MM:850nm/1300nm | ≤0.2dB | ≤0.3dB |
APC | 1310nm/1550nm | ≤0.3dB | |||
回波损耗 | UPC | SM:1310nm/1550nm MM:850nm/1300nm | ≥55 dB | ≥35 dB | |
APC | 1310nm/1550nm | ≥65 dB | |||
机械特性 (附加损耗) | 攻击试验 | 1.8高度,8次 | <0.1 dB | <0.1 dB | |
振动试验 | 10-60Hz,1mm全振幅 | <0.1 dB | <0.1 dB | ||
插拔寿命 | 1000次以上 | <0.1 dB | <0.1 dB | ||
抗拉强度 | >100N | <0.1 dB | <0.1 dB | ||
情况特性 (附加损耗) |
崎岖温循环试验 | -25℃~+70℃,2循环 | <0.2 dB | <0.2 dB | |
高温试验 | +80℃,2小时 | <0.2 dB | <0.2 dB | ||
低温试验 | -40℃,2小时 | <0.2 dB | <0.2 dB | ||
湿热试验 | +40℃,90-95%RH,2小时 | <0.2 dB | <0.2 dB |
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.